What I Can Teach You About Machines

Water Jet Cutting Equipment And Everything You Need To Know About It

The 5 most renowned benefits of water jet cutting systems

It is essential that you know what benefits the waterjet cutting technology is able to give you regardless if you are new with it or have already tried using it. There are benefits that can be provided by the water jet cutting systems and it would be helpful to you in making a good business decision if you are able to read more about it from this article.

Abrasive waterjet cutting, as well as pure waterjet cutting, are the two kinds of methods that exist in the waterjet technology. When you are going to cut soft materials such as paper or foam, it would be best to use the pure waterjet cutting method where only water stream is used for cutting. So that the abrasive waterjet cutting method will work, a granular abrasive needs to be added in the water stream. Power will be added to the cutting stream by the granular abrasive that is why the abrasive waterjet cutting method is essential when you need to cut hard materials like ceramics or metal.

Know more about the waterjet technology with these five benefits that are being outlined for you:

1. You do not have to worry about the material limitations
Almost all kinds of materials are being cut by the waterjet technology including rubber, rock or stone, ceramics, plastics, composites, and metals. A 200mm thickness is achievable as long as you are going to add a granular abrasive to your waterjet cutting machine to make it perform better.

2. There is no need for you to think about the HAZ or the heat affected zone
The HAZ or the heat affected zone should be less of your worries since the water jet cutting equipment is made up of a cold cutting method. There is no need for you to think about the risks of burns anymore since the cold cutting makes sure to enable clean cuts and keeps the safety of the operator significantly.

3. You don’t have to worry about any falsification or deformity of materials
The heat exposure of the materials can be bypassed because of the cold cutting method and this is very much needed especially in handling hard materials such as metal where distortion is possible to happen. A burr-free cut, as well as a smooth finish, will be the result from this.

4. You don’t have to do any additional finishing process
The products will be provided with the highest cutting quality with accurate results that is why you do not need to worry about any finishing process that you might need to apply.

5. Hazardous waste is no longer present
It is a must for business establishments these days to make sure that their products are environmentally friendly since this process is becoming more apparent in the industry.

Figuring Out Waterjets

Where To Start with Waterjets and More